www.alpinebender.com Print   Close  


       T Series
Hydraulic Twin Head Bender


 
  • T Series are Twin Head Compression Bender
  • NC Controller with manual bend angle setting
  • Multi groove tooling design
  • High production for symmetric frame work
  • Apply to Furniture, Display, Fitness Equipment etc.
  • Model: T Series



    Capacity
    T38 Up to 1.5" OD
    T38-90 Up to 1.5" OD
    T50 Up to 2" OD
      Video: T38-90
      Feature:

        ANC Series Hydraulic Bending Machine
    Specification Unit T38 T38-90 T50
     MAX. PIPE O.D. mm 38.1 X 2.5 38.1 X 2.5 38.1 X 2.5
    inch 1.5 X 0.98 1.5 X 0.98 1.5 X 0.98
     MAX. Bending Radius mm 38 - 180 38 - 180 38 - 180
    inch 1.5 - 7.0 1.15- 7.0 1.15- 7.0
     Distance Between Die mm 170 - 1430 170 - 930 205 - 2300
    inch 6.9 56.2 6.9 36.6 8.07 90.5
     Multi Groove on OD piece 3 - 4 3 - 4 4 - 5
           
     Multi Groove on 1 OD piece 2 - 3 2 - 3 3 - 4
           
     Multi Groove on 1 OD piece 1 2 1 2 2 - 3
           
     Multi Groove on 1 OD piece 1 1 1 2
           
     Dimension (LxWxH) mm 1900 X 1000 X 1500 2300 X 1100 X 1700 2300 X 1100 X 1700
    inch 74.8 X 39.3 X 59.0 90.5 X 43.3 X 66.9 90.5 X 43.3 X 66.9
     TOTAL WEIGHT kg 1000 1300 1300
    lbs 2200 2860 2860

        T Series Hydraulic Bending Machine
    Standard Machine and Accessories:
  • NC Controller
  • Twin Hand Bending
  • T38, T50 with standard in-plane bending
  • T38-90 with both in-plane and out-plane bending
  • Hydraulic Driven Bending Head
  • Water Cooling System
  • Foot Pedal Cycle start
  • Operation and Maintenance Manual
  • Tool Box with Adjusted Tools
  • Electric: As required (3 phase 208V or 220V or 480V)

  • Upgrade Options:
  • Safety Mat Connection Ready (without CE Mark)
  • CE Mark
  • Safety Mat
  • Safety Scanner
  • Free Standing Pedestal - The foot pedal is replaced by a free standing pedestal